Conducttivity Controller HANNA

รายละเอียดสินค้า

Conductivity Controller Measuring in mS/cm, Hanna Instruments® Mini Conductivity Controller, BL 983327-1, 115/230 VAC HAN-BL983327-1 The BL 983327 is a panel mounted mini conductivity controller with an output relay, that has been designed for easy, affordable installation in tight spaces, ideal for simple yet effective process control. These conductivity controllers feature automatic compensation for variations in temperature. The probe is easy-to-clean and requires very little maintenance. The calibration is performed at 1 point, through a trimmer. All wiring and connections to external devices are done through the terminals on the rear panel. The multicolor LED continuously indicates if the controller is in measurement, dosing or alarm mode. You can also choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful during maintenance operations, because it permits you to enable or disable the dosing relay according to your need. The overtime control system advises you when the relay is active too long, helping to prevent overdosing. 115/230 VAC. Hanna #: BL983327-1. ___________________________________________ Range: 0.00 to 10.00 mS/cm Resolution: 0.01 mS/cm Accuracy: ±2% F.S. Probe: HI 7632-00 (not included) Temperature Compensation: Automatic, 5 to 50°C (41 to 122°F) with ß=2%/°C Calibration: Manual, with CAL trimmer Dosing Relay: 1, max 2A (fuse protected), 250 Vac, 30 Vdc (Contact closed when reading exceeds setpoint value) Setpoint: Adjustable from 0 to 10 mS/cm. Overtime: Adjustable, typically from 5 to approx. 30 minutes. Dimensions: 83 x 53 x 99 mm (3.3 x 2.1 x 3.9\') Power: 115/230 VAC