เทปซ่อมท่อฉุกเฉิน น้ำยาล้างคราบน้ำมันจารบี สเปรย์น้ำยากัดสนิม น้ำยาล้างคราบกาว น้ำยาทำความสะอาดเบรค

รายละเอียดสินค้า

HARDEX HEAVY DUTY BEARING & BOLT LOCK Type : 6277 Application Guide : Locking & Sealing Strenght (relative) : High Strength Color : Red For Threads Viscosity (mPa.s)<>20% : <M36 5000 Gap filling ability (mm) : 0.07-0.40 Breakaway Torque : 25-54 Prevailing Torque : 20-45 Cure Speed= hrs 50% cure (hrs) 90 %cure (hrs) : 1 24 Temperature-range : -55 to +150oC Sizes : 10ml, 50ml Thread-Lok Anaerobics is a single compound and self curing in the close fitting metal past surface when absence of air. Provide strength and integrity. DIRECTIONS : 1) Surface must be cleaned and dry. 2) Shake the bottle before use. 3) Apply enough Thread_Lok to both surfaces. 4) Assemble components, remove excess. 5) Allow assemble to cure in the minutes and full strength after 24 hours. (It depend on product grade and type of surface). CAUTION : These suggestions and data are based on test results we believe to be reliable. They are offered in good faith-but without guarantee as conditions and methods of our products are beyond our control. Our application and processing information is intended solely to assist our costumes in using our product. However this information does not in any way free the user from the necessity of conducting his own appropriate tests to using our product, in order to ensure that the product meet the requirements set. WARNING : Avoid contact with eyes. In case of eye contact, flush eyes with tepid water for 15 minutes, keeping eyelids open. Prolonged and repeated contact with skin may cause allergies by sensitive persons. People with sensitive skin are recommended to use a barrier cream or gloves. Safety data sheet are available on request. ติดต่อ ลินิน 081-633-7136 www.lpslabs.com , www.surfaceprotech.com Email: [email protected] Email : [email protected]